Scope Rings
Value-loaded features like a break-open action and adjustable length-of-pull provide higher-end performance at an entry-level price. The break-open hood offers smooth action for right- and left-handed shooters, while providing easy primer access and cleaning. 1 removable stock spacers make for a perfect fit for hunters of all ages and sizes. QLA muzzle speeds reloading time. Adjustable fiber-optic sights. Triple-lead-thread breech plug prevents seizing. Includes a Cabelas 3-9x40 muzzleloader scope with duplex reticle, rings and bases. Length-of-pull: 12-1/2 to 13-1/2.Available: .50...
[more info]High-quality Ruger factory rings install easily and provide solid, zero-movement scope attachment to Ruger rifles and handguns with integral bases, No. 1 rifles with factory base, and No. 3 rifles with special factory bases available below. Low, Medium, High, and Extra-High heights in blued carbon steel, natural stainless steel, or stainless with Rugers proprietary matte Target Grey finish. SPECS: Carbon steel, polished blue finish (BL) , stainless steel, natural (SS) , or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.)
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a U.S. quarter in a pinch. Crossbolt has a...
[more info]Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014 then engraved with matching serial number. In addition the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused including both sides of the steel ring nut to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even matte finish then hard anodized with a durable black finish for...
[more info]Heavy duty 30mm steel rings machined in pairs serial numbered and designed specifically to securely hold large heavy scopes on hard-recoiling guns. Weaver-style clamp with big 1/2 nut really snugs ring to the mount. Ultra-High provides optimum height for AR-15 AR-10 and SR-25 rifles. MAX-50 is 1 (2.5cm) wide with six clamping screws. Gives 60% more holding power to keep scopes on .50 BMG rifles. Mfg: Badger Ordnance SPECS: Steel black matte finish. Ring height measured from top of mount to center of ring; Standard - .823 (2cm) Medium - .885 (22.5mm) Medium High - 1.0 (2.5cm) High - 1.125...
[more info]Heavy duty 30mm steel rings machined in pairs serial numbered and designed specifically to securely hold large heavy scopes on hard-recoiling guns. Weaver-style clamp with big 1/2 nut really snugs ring to the mount. Ultra-High provides optimum height for AR-15 AR-10 and SR-25 rifles. MAX-50 is 1 (2.5cm) wide with six clamping screws. Gives 60% more holding power to keep scopes on .50 BMG rifles. Mfg: Badger Ordnance SPECS: Steel black matte finish. Ring height measured from top of mount to center of ring; Standard - .823 (2cm) Medium - .885 (22.5mm) Medium High - 1.0 (2.5cm) High - 1.125...
[more info]High-quality Ruger factory rings install easily and provide solid zero-movement scope attachment to Ruger rifles and handguns with integral bases No. 1 rifles with factory base and No. 3 rifles with special factory bases available separately. Low Medium High and Extra-High heights in blued carbon steel natural stainless steel or stainless with Rugers proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel polished blue finish (BL) stainless steel natural (SS) or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) -...
[more info]High-quality Ruger factory rings install easily and provide solid zero-movement scope attachment to Ruger rifles and handguns with integral bases No. 1 rifles with factory base and No. 3 rifles with special factory bases available separately. Low Medium High and Extra-High heights in blued carbon steel natural stainless steel or stainless with Rugers proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel polished blue finish (BL) stainless steel natural (SS) or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) -...
[more info]High-quality Ruger factory rings install easily and provide solid zero-movement scope attachment to Ruger rifles and handguns with integral bases No. 1 rifles with factory base and No. 3 rifles with special factory bases available separately. Low Medium High and Extra-High heights in blued carbon steel natural stainless steel or stainless with Rugers proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel polished blue finish (BL) stainless steel natural (SS) or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) -...
[more info]High-quality Ruger factory rings install easily and provide solid zero-movement scope attachment to Ruger rifles and handguns with integral bases No. 1 rifles with factory base and No. 3 rifles with special factory bases available separately. Low Medium High and Extra-High heights in blued carbon steel natural stainless steel or stainless with Rugers proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel polished blue finish (BL) stainless steel natural (SS) or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) -...
[more info]High-quality Ruger factory rings install easily and provide solid zero-movement scope attachment to Ruger rifles and handguns with integral bases No. 1 rifles with factory base and No. 3 rifles with special factory bases available separately. Low Medium High and Extra-High heights in blued carbon steel natural stainless steel or stainless with Rugers proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel polished blue finish (BL) stainless steel natural (SS) or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) -...
[more info]Heavy duty 30mm steel rings machined in pairs serial numbered and designed specifically to securely hold large heavy scopes on hard-recoiling guns. Weaver-style clamp with big 1/2 nut really snugs ring to the mount. Ultra-High provides optimum height for AR-15 AR-10 and SR-25 rifles. MAX-50 is 1 (2.5cm) wide with six clamping screws. Gives 60% more holding power to keep scopes on .50 BMG rifles. Mfg: Badger Ordnance SPECS: Steel black matte finish. Ring height measured from top of mount to center of ring; Standard - .823 (2cm) Medium - .885 (22.5mm) Medium High - 1.0 (2.5cm) High - 1.125...
[more info]Heavy duty 30mm steel rings machined in pairs serial numbered and designed specifically to securely hold large heavy scopes on hard-recoiling guns. Weaver-style clamp with big 1/2 nut really snugs ring to the mount. Ultra-High provides optimum height for AR-15 AR-10 and SR-25 rifles. MAX-50 is 1 (2.5cm) wide with six clamping screws. Gives 60% more holding power to keep scopes on .50 BMG rifles. Mfg: Badger Ordnance SPECS: Steel black matte finish. Ring height measured from top of mount to center of ring; Standard - .823 (2cm) Medium - .885 (22.5mm) Medium High - 1.0 (2.5cm) High - 1.125...
[more info]High-quality Ruger factory rings install easily and provide solid zero-movement scope attachment to Ruger rifles and handguns with integral bases No. 1 rifles with factory base and No. 3 rifles with special factory bases available separately. Low Medium High and Extra-High heights in blued carbon steel natural stainless steel or stainless with Rugers proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel polished blue finish (BL) stainless steel natural (SS) or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) -...
[more info]
